Joint unit QMP 80

Joint unit with brushless, electronically-controlled servomotor, digital load cell and LED status display. The path measurement sensor (absolute encoder) is installed directly in the ball screw.

Type QMP 80/05 QMP 80/10 QMP 80/20
Nominal force 5 kN 10 kN 20 kN
Recommended range 0,8-5 kN 2-10 kN 4-20 kN

Features

  • Stamp speed: 220 mm/s
  • Accuracy force measurement: < 0.5 % from end value
  • Repeat accuracy: 0.01 mm at approx. 10 mm/s
  • Resolution path measurement: 0.002 mm
  • Hold time: 2.5 s with maximum force
  • Tool holder push design: DIN 810 A20
  • Tool holder pull design: M20x1.5 40 deep
  • Maximum tool weight: 10 kg
  • Locking device using adjusting nut with ball bearing guide
  • Internal overrun protection
  • Independent emergency shutdown for overload and excess temperature

Options

  • Working stroke: 200/300/500 mm
  • Drive unit fixed or with input drive offset V2
  • Power sensor: push (DR) or pull (ZU)
  • Holding brake (HB) for any holding period

Suitable Controls

Product info