Joint unit QMP 140

Joint unit with brushless, electronically-controlled servomotor, digital load cell and LED status display. The path measurement sensor (absolute encoder) is installed directly in the ball screw.

Type QMP 140
Nominal force 100 kN
Recommended range 20 – 100 kN

Features

  • Stamp speed: 100 mm/s
  • Accuracy force measurement: < 0.5 % from end value
  • Repeat accuracy: 0.01 mm at approx. 10 mm/s
  • Resolution path measurement: 0.002 mm
  • Hold period: 2.5 s with maximum force
  • Tool holder push design: DIN 810 A50
  • Tool holder pull design: M36x3 60 deep
  • Maximum tool weight: 10 kg
  • Locking device using adjusting nut with ball bearing guide
  • Internal overrun protection
  • Independent emergency shutdown for overload and excess temperature

Options

  • Working stroke: 200/300/500 mm
  • Drive unit fixed or with input drive offset V2
  • Power sensor: push (DR) or pull (ZU)
  • Holding brake (HB) for any holding period

Suitable Controls

Product info