MultiPro FL

MultiPro FL

All QMP series joint units can be controlled with the high-end joint control MultiPro FL. It is suitable for complex, highly precise pressing, jointing and shaping tasks. Manual workstations and automatic stations can be equipped with it. Several MultiPro FL or MultiClassic FL controls can be connected to a multi-channel system.

  • Digital measurement signal processing
  • 5.7-inch LCD display with illumination
  • 2x 3 LED status displays for strength and path
  • Traceable calibration
  • Programming and parameterisation using PC software
  • Freely programmable press/joint cycles (push and pull)
  • Automatic self-test of joint control and the QMP joint unit
  • Mobile long-term storage: 128 MB to 1 GB (CompactFlash card)
  • Ring memory for 1,000 measured values
  • Statistical memory: IO evaluation, mean value, machine and process capability etc.
  • Ring memory for 500 measured values
  • Parameter and programme safeguarding in EEPROM

Technical data  
Number of programmes 255
Commands per programme 200
Instruction set 37 commands
Joint levels per programme 199
Available joint processes 9
Inputs/outputs 4/4
Inputs/outputs expandable yes
Route resolution 0,01 mm
Sampling rate 1 kHz
Interfaces V24
RS 232
DSM Systembus
Profibus
Optional interfaces TCP/IP
Protective class IP 40, optional IP 54

Accessories

  • IO extension
  • Printer
  • Signal lamp for status display: OK, NOK, operational
  • Signal lamp with switch key for NOK release
  • Programme selection switch for direct programme selection