Drilling Unit

MRCE series – Three-phase electric motor – pneumatic thrust and return

 

Model Code No-load speed Drilling capacity mm Total stroke Braked stroke Feed thrust at 6 bar Power Weight Air consumption Standard chuck
    rpm/min Wood Aluminium Steel Nm * mm Watt HP   Kg Code Capacity
MRCE14 8612014 1400 11 8 6 50 50 27 90 0,12 6,4 0,4 3715611 0-6
MRCE30 8612015 3000 10 7 5 50 50 27 135 0,18 6,4 0,4 3715611 0-6
MRCE14 8612014 1400 11 8 6 50 50 27 90 0,12 6,4 0,4 3715611 0-6

Chuck connection : B10

TEP series – Three-phase electric motor . pneumatic thrust and return

 

Model Code No-load speed Drilling capacity mm Total stroke Braked stroke Feed thrust at 6 bar Power Weight Air consumption Standard chuck
    rpm/min Wood Aluminium Steel Nm * mm Watt HP   Kg Code Capacity
TEP13
  

8612007

1300 16 12 10 50 50 100 375 0,5 15 1,5 3716011 1-10
TEP13
  

8612307

1300 16 12 10 100 50 100 375 0,5 16,5 2,5 3716011 1-10
TEP13
  

8612317

1300 16 12 10 100 50 100 375 0,5 16,5 2,5 3716011 1-10
TEP17
  

8612006

1700 14 10 8 50 50 100 375 0,5 15 1,5 3716011 1-10
TEP17
  

8612306

1700 14 10 8 100 50 100 375 0,5 16,5 2,5 3716011 1-10
TEP17
  

8612316

1700 14 10 8 100 75 100 375 0,5 16,5 2,5 3716011 1-10
TEP30
  

8612004

3000 12 8 6 50 50 100 375 0,5 15 1,5 3716011 1-10
TEP30
  

8612304

3000 12 8 6 100 50 100 375 0,5 16,5 2,5 3716011 1-10
TEP30
  

8612314

3000 12 8 6 100 75 100 375 0,5 16,5 2,5 3716011 1-10

Chuck connector B12

MRC series – Pneumatic motor – pneumatic thrust and return

 

Model Code No-load speed Drilling capacity mm Total stroke Braked stroke Feed thrust at 6 bar Power Weight Air consumption Air Tuyau Standard chuck
    rpm/min Wood Aluminium Steel mm mm Kg Watt HP Kg NI/cycle   ø min Code Capacity
MRC11
  

8602019

5500 8 6 4 50 50 27 100 0,13 2,7 200 1/4′ GAS 6 3715411 0-4

Chuck connection : B10

TFLF series – Pneumatic thrust and return

 

Model Code No-load speed Drilling capacity mm Total stroke Braked stroke Feed thrust at 6 bar Power Weight Air consumption Air Hose Standard chuck
    rpm/min Wood Aluminium Steel mm mm Kg Watt HP Kg NI/cycle   ø min Code Capacity
TFLF1
  

8602021

3000 11 7 5 50 50 70 160 0,22 6,5 500 1/4′ GAS 6 3715814 0-8
TFLF1
  

8602321

3000 11 7 5 100 50 70 160 0,22 8 500 1/4′ GAS 6 3715814 0-8
TFLF1
  

8602331

3000 11 7 5 100 75 70 160 0,22 8 500 1/4′ GAS 6 3715814 0-8
TFLF2
  

8602022

1200 13 9 7 50 50 70 160 0,22 6,5 500 1/4′ GAS 6 3715814 0-8
TFLF2
  

8602322

1200 13 9 7 100 50 70 160 0,22 8 500 1/4′ GAS 6 3715814 0-8
TFLF2
  

8602332

1200 13 9 7 100 75 70 160 0,22 8 500 1/4′ GAS 6 3715814 0-8
TFLF3
  

8602023

700 14 11 8 50 50 70 160 0,22 6,5 500 1/4′ GAS 6 3715814 0-8
TFLF3
  

8602323

700 14 11 8 100 50 70 160 0,22 8 500 1/4′ GAS 6 3715814 0-8
TFLF3
  

8602333

700 14 11 8 100 75 70 160 0,22 8 500 1/4′ GAS 6 3715814 0-8

Chuck connection : 3/8” x 24

Models stroke 50 mm A B C D G
           
TFLF1
  

62
  

132 100 105 410
TFLF2 – TFLF3
  

80
  

132 100 105 428
TFLG0 – TFLG2
  

62
  

132 100 105 410
TFLG3 – TFLG5
  

90
  

132 100 105 438
Models stroke 100 mm A B C D G
           
TFLF1
  

55
  

178 150 157 551
TFLF2 – TFLF3
  

80
  

178 150 157 576
TFLG0 – TFLG2
  

55
  

178 150 157 551
TFLG3
  

80
  

178 150 157 576

MRCE series – Three-phase electric motor – pneumatic thrust and return

 

Model Code No-load speed Drilling capacity mm Total stroke Braked stroke Feed thrust at 6 bar Power Weight Air consumption Air Hose Standard chuck
    rpm/min Wood Aluminium Steel mm mm Kg Watt HP Kg NI/cycle   ø min Code Capacity
TFLG0
  

8602027

5000 12 8 6 50 50 100 285 0,38 8 500 1/4′ GAS 8 3715815 0-8
TFLG0
  

8602327

5000 12 8 6 100 50 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG0
  

8602337

5000 12 8 6 100 75 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG2
  

8602024

2500 14 10 8 50 50 100 285 0,38 8 500 1/4′ GAS 8 3715815 0-8
TFLG2
  

8602324

2500 14 10 8 100 50 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG2
  

8602334

2500 14 10 8 100 75 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG3
  

8602025

1100 18 13 10 50 50 100 285 0,38 8 500 1/4′ GAS 8 3715815 0-8
TFLG3
  

8602325

1100 18 13 10 100 50 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG3
  

8602335

1100 18 13 10 100 75 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG5
  

8602026

500 20 16 13 50 50 100 285 0,38 8 500 1/4′ GAS 8 3715815 0-8
TFLG5
  

8602326

500 20 16 13 100 50 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8
TFLG5
  

8602336

500 20 16 13 100 75 100 285 0,38 9,5 500 1/4′ GAS 8 3715815 0-8

Chuck connection : 1/2” x 20

TASG series – Pneumatic thrust and return

 

Model Code No-load speed Drilling capacity mm Total stroke Braked stroke Feed thrust at 6 bar Power Weight Air consumption Air Hose Standard chuck
    rpm/min Wood Aluminium Steel mm mm Kg Watt HP Kg NI/cycle   ø min Code Capacity
TASGH
  

8602349

14000 6 3 1,5 100 50 100 450 0,6 5,7 650 1/4′ GAS 10 ER * *
TASG0
  

8602350

3100 8 6 4 100 50 100 450 0,6 5,7 650 1/4′ GAS 10 3716013 1-10
TASG1
  

8602351

2000 13 8 6 100 50 100 450 0,6 5,7 650 1/4′ GAS 10 3716013 1-10
TASG2
  

8602352

1750 14 11 8 100 50 100 450 0,6 5,7 650 1/4′ GAS 10 3716013 1-10
TASG3
  

8602353

700 16 13 11 100 50 100 450 0,6 5,9 650 1/4′ GAS 10 3716313 1-13
TASG5
  

8602355

390 15 13 100 50 100 450 0,6 5,9 650 1/4′ GAS 10 3716313 1-13
TASG7
  

8602357

280 16 14 100 50 100 450 0,6 5,9 650 1/4′ GAS 10 3716313 1-13
TASG8
  

8602358

200 18 15 100 50 100 450 0,6 5,9 650 1/4′ GAS 10 3716313 1-13

Chuck connection: B16

ER20 collet holder. Collets in sizes from 1 to 13 mm are available on request on all models. A 16 mm chuck is available on request on the models TASG5, TASG7 and TASG 8.

Multiple heads with adjustable centre-to-centre. Drilling capacity up to 5 mm

 
These can be mounted on: all TEP series electro-pneumatic units; all TAG and TASG series pneumatic units; all TFLG series pneumatic units with the exception of the version with a 50/50 stroke.

Model Code Chuck D D r.p.m. max Weight
    min max   Kg
MINI2
  

3732418

2 13,5 69,5 3500 0,9

Multiple heads with adjustable centre-to-centre – Drilling capacity up to 5 mm

 
These can be mounted on: all TEP series electro-pneumatic units; all TAG and TASG series pneumatic units; all TFLG series pneumatic units with the exception of the version with a 50/50 stroke.

Model Code Chuck D D r.p.m. max Weight
    min max   Kg
MINI3
  

3733418

3 19,9 75,9 3500 1,3

Multiple heads with adjustable centre-to-centre – Drilling capacity up to 5 mm

 
These can be mounted on: all TEP series electro-pneumatic units; all TAG and TASG series pneumatic units; all TFLG series pneumatic units with the exception of the version with a 50/50 stroke.

Model Code Chuck D D r.p.m. max Weight
    min max   Kg
MINI3L
  

3733419

3 27 83 3500 1

UFM modular drilling units

 
These can be mounted on: all TEP series electro-pneumatic units; all TAG and TASG series pneumatic units; all TFLG series pneumatic units with the exception of the version with a 50/50 stroke.

Model Code Chuck D D r.p.m. max Weight
    min max   Kg
MINI3L
  

3733419

3 27 83 3500 1
As standard the units are fitted with a motor and a keyed chuck. Units can be fitted with an ER collet holder chuck on request.

These units are designed for drilling aluminium, PVC, various types of wood and thin sheet metal. The unit consists of a slide and a pneumatic motor.
Slides are available in three stroke lengths: 25, 50 and 100 mm. Slides can be fitted with a selection of pneumatic motors with three power ratings: 190, 430 and 480 Watt. Modular units can be fi tted with and end-ofstroke sensor controlled by pneumatic circuits or a PLC. Speed decelerators and pneumatic
control circuits for driving one or more units are also available on request.

Code
7715021 – Pneumatic end-of-stroke microswitch (1)
3999409 – Magnetic end-of-stroke microswitch (2)

Motors for UFM units

 

Technical features Model Code No-load speed
      rpm/min
POWER 190 Watt
  

LFB0D
  

8711182.1 A 6200
POWER 190 Watt
  

LFB1D
  

8711183.1 A 3500
CONSUMPTION 480 NI/min
  

LFB2D
  

8711184.1 A 1300
CONSUMPTION 480 NI/min
  

LFB3D
  

8711185.1 A 1300

For motor specifications, see the section “Pneumatic motors”.